# Makefile.in generated by automake 1.9.6 from Makefile.am.
# doc/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



srcdir = .
top_srcdir = ..

pkgdatadir = $(datadir)/glusterfs
pkglibdir = $(libdir)/glusterfs
pkgincludedir = $(includedir)/glusterfs
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /usr/bin/install -c
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i686-pc-linux-gnu
host_triplet = i686-pc-linux-gnu
subdir = doc
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-exec-recursive install-info-recursive \
	install-recursive installcheck-recursive installdirs-recursive \
	pdf-recursive ps-recursive uninstall-info-recursive \
	uninstall-recursive
man8dir = $(mandir)/man8
am__installdirs = "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(voldir)"
NROFF = nroff
MANS = $(man8_MANS)
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
volDATA_INSTALL = $(INSTALL_DATA)
DATA = $(vol_DATA)
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /root/glusterfs-3.2.5/missing --run aclocal-1.9
AMDEP_FALSE = #
AMDEP_TRUE = 
AMTAR = ${SHELL} /root/glusterfs-3.2.5/missing --run tar
AM_LIBTOOLFLAGS = --quiet
AM_MAKEFLAGS =  --no-print-directory --quiet
AR = ar
ARGP_STANDALONE_CPPFLAGS = 
ARGP_STANDALONE_LDADD = 
AUTOCONF = ${SHELL} /root/glusterfs-3.2.5/missing --run autoconf
AUTOHEADER = ${SHELL} /root/glusterfs-3.2.5/missing --run autoheader
AUTOMAKE = ${SHELL} /root/glusterfs-3.2.5/missing --run automake-1.9
AWK = gawk
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2
CONTRIBDIR = $(top_srcdir)/contrib
CPP = gcc -E
CPPFLAGS = 
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
ECHO = echo
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = grep -E
EXEEXT = 
F77 = 
FFLAGS = 
FUSERMOUNT_SUBDIR = 
FUSE_CLIENT_SUBDIR = fuse
GF_CFLAGS =  -O0
GF_DARWIN_HOST_OS_FALSE = 
GF_DARWIN_HOST_OS_TRUE = #
GF_DISTRIBUTION = 
GF_FUSE_CFLAGS = -DFUSERMOUNT_DIR=\"$(bindir)\"
GF_GLUSTERFS_CFLAGS =  -O0
GF_GLUSTERFS_LDFLAGS = 
GF_HOST_OS = GF_LINUX_HOST_OS
GF_LDADD = 
GF_LDFLAGS = -rdynamic
HAVE_BACKTRACE = 
HAVE_MALLOC_STATS = 
HAVE_SPINLOCK = 
HAVE_STRNLEN = 
IBVERBS_SUBDIR = 
INCLUDES = -I$(top_srcdir)/libglusterfs/src -I$(CONTRIBDIR)/uuid
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
LD = /usr/bin/ld
LDFLAGS = 
LEX = flex
LEXLIB = -lfl
LEX_OUTPUT_ROOT = lex.yy
LIBOBJS = 
LIBS = -ldl -lpthread 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBXML2_CFLAGS = -I/usr/include/libxml2  
LIBXML2_LIBS = -lxml2  
LN_S = ln -s
LTLIBOBJS = 
MAKEINFO = ${SHELL} /root/glusterfs-3.2.5/missing --run makeinfo
OBJEXT = o
PACKAGE = glusterfs
PACKAGE_BUGREPORT = gluster-users@gluster.org
PACKAGE_NAME = glusterfs
PACKAGE_STRING = glusterfs 3.2.5
PACKAGE_TARNAME = glusterfs
PACKAGE_VERSION = 3.2.5
PATH_SEPARATOR = :
PKG_CONFIG = /usr/bin/pkg-config
PYTHON = /usr/bin/python
PYTHON_EXEC_PREFIX = ${exec_prefix}
PYTHON_PLATFORM = linux2
PYTHON_PREFIX = ${prefix}
PYTHON_VERSION = 2.6
RANLIB = ranlib
RDMA_SUBDIR = 
RLLIBS = -lreadline -lncurses
SED = /bin/sed
SET_MAKE = 
SHELL = /bin/sh
STRIP = strip
SYNCDAEMON_COMPILE = 1
SYNCDAEMON_SUBDIR = utils
VERSION = 3.2.5
YACC = bison -y
ac_ct_AR = ar
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_F77 = 
ac_ct_LD = /usr/bin/ld
ac_ct_RANLIB = ranlib
ac_ct_STRIP = strip
ac_pt_PKG_CONFIG = /usr/bin/pkg-config
am__fastdepCC_FALSE = #
am__fastdepCC_TRUE = 
am__fastdepCXX_FALSE = #
am__fastdepCXX_TRUE = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = i686-pc-linux-gnu
build_alias = 
build_cpu = i686
build_os = linux-gnu
build_vendor = pc
datadir = ${prefix}/share
exec_prefix = ${prefix}
host = i686-pc-linux-gnu
host_alias = 
host_cpu = i686
host_os = linux-gnu
host_vendor = pc
includedir = ${prefix}/include
infodir = ${prefix}/info
initdir = /etc/init.d
install_sh = /root/glusterfs-3.2.5/install-sh
launchddir = /Library/LaunchDaemons
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localstatedir = /var
mandir = ${prefix}/man
mkdir_p = mkdir -p --
mountutildir = /sbin
oldincludedir = /usr/include
pkgpyexecdir = ${pyexecdir}/glusterfs
pkgpythondir = ${pythondir}/glusterfs
prefix = /usr
program_transform_name = s,x,x,
pyexecdir = ${exec_prefix}/lib/python2.6/site-packages
pythondir = ${prefix}/lib/python2.6/site-packages
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
subdirs =  argp-standalone
sysconfdir = /etc
target_alias = 
EXTRA_DIST = glusterfs.vol.sample glusterfsd.vol.sample glusterfs.8 mount.glusterfs.8\
	porting_guide.txt authentication.txt coding-standard.pdf get_put_api_using_xattr.txt \
	translator-options.txt mac-related-xattrs.txt replicate.pdf glusterd.vol gluster.8 \
        glusterd.8 glusterfsd.8

SUBDIRS = examples hacker-guide
voldir = $(sysconfdir)/glusterfs
vol_DATA = glusterfs.vol.sample glusterfsd.vol.sample glusterd.vol
man8_MANS = glusterfs.8 mount.glusterfs.8 gluster.8 glusterd.8 glusterfsd.8
CLEANFILES = 
all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  doc/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:
install-man8: $(man8_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man8dir)" || $(mkdir_p) "$(DESTDIR)$(man8dir)"
	@list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.8*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    8*) ;; \
	    *) ext='8' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \
	done
uninstall-man8:
	@$(NORMAL_UNINSTALL)
	@list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.8*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    8*) ;; \
	    *) ext='8' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \
	  rm -f "$(DESTDIR)$(man8dir)/$$inst"; \
	done
install-volDATA: $(vol_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(voldir)" || $(mkdir_p) "$(DESTDIR)$(voldir)"
	@list='$(vol_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(volDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(voldir)/$$f'"; \
	  $(volDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(voldir)/$$f"; \
	done

uninstall-volDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(vol_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(voldir)/$$f'"; \
	  rm -f "$(DESTDIR)$(voldir)/$$f"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(mkdir_p) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile $(MANS) $(DATA)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(voldir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am: install-man install-volDATA

install-exec-am:

install-info: install-info-recursive

install-man: install-man8

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-info-am uninstall-man uninstall-volDATA

uninstall-info: uninstall-info-recursive

uninstall-man: uninstall-man8

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
	clean clean-generic clean-libtool clean-recursive ctags \
	ctags-recursive distclean distclean-generic distclean-libtool \
	distclean-recursive distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-exec install-exec-am install-info \
	install-info-am install-man install-man8 install-strip \
	install-volDATA installcheck installcheck-am installdirs \
	installdirs-am maintainer-clean maintainer-clean-generic \
	maintainer-clean-recursive mostlyclean mostlyclean-generic \
	mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
	tags tags-recursive uninstall uninstall-am uninstall-info-am \
	uninstall-man uninstall-man8 uninstall-volDATA

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
