# Makefile.in generated by automake 1.10.2 from Makefile.am.
# doc/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.




pkgdatadir = $(datadir)/rrdtool
pkglibdir = $(libdir)/rrdtool
pkgincludedir = $(includedir)/rrdtool
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i686-pc-linux-gnu
host_triplet = i686-pc-linux-gnu
target_triplet = i686-pc-linux-gnu
subdir = doc
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/rrd_config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(idocdir)" "$(DESTDIR)$(ihtmldir)" \
	"$(DESTDIR)$(imandir)"
idocDATA_INSTALL = $(INSTALL_DATA)
ihtmlDATA_INSTALL = $(INSTALL_DATA)
imanDATA_INSTALL = $(INSTALL_DATA)
DATA = $(idoc_DATA) $(ihtml_DATA) $(iman_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /home/izto/src/rrdtool-1.3.8/missing --run aclocal-1.10
ALL_LIBS = -lxml2 -lcairo -lcairo -lcairo -lm  -lcairo -lpng12   -lpangocairo-1.0 -lpango-1.0 -lcairo -lgobject-2.0 -lgmodule-2.0 -lglib-2.0  
ALL_LINGUAS = 
AMTAR = ${SHELL} /home/izto/src/rrdtool-1.3.8/missing --run tar
AR = ar
AUTOCONF = ${SHELL} /home/izto/src/rrdtool-1.3.8/missing --run autoconf
AUTOHEADER = ${SHELL} /home/izto/src/rrdtool-1.3.8/missing --run autoheader
AUTOMAKE = ${SHELL} /home/izto/src/rrdtool-1.3.8/missing --run automake-1.10
AWK = gawk
CATALOGS = 
CATOBJEXT = .gmo
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2 -D_GNU_SOURCE -fno-strict-aliasing -Wall -std=c99 -pedantic -Wundef -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline -Wold-style-definition -W  -fPIC -DPIC
COMP_PERL = perl_piped perl_shared
COMP_PYTHON = python
COMP_RUBY = 
CORE_LIBS = -lm 
CPP = gcc -E
CPPFLAGS =  -I/usr/include/cairo -I/usr/include/libpng12 -I/usr/include/pixman-1 -I/usr/include/freetype2   -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12   -I/usr/include/libxml2
CYGPATH_W = echo
DATADIRNAME = share
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
EXEEXT = 
FGREP = /bin/grep -F
GETTEXT_PACKAGE = rrdtool
GMOFILES = 
GMSGFMT = /usr/bin/msgfmt
GREP = /bin/grep
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
INSTOBJEXT = .mo
INTLLIBS = 
INTLTOOL_EXTRACT = /usr/bin/intltool-extract
INTLTOOL_MERGE = /usr/bin/intltool-merge
INTLTOOL_PERL = /usr/bin/perl
INTLTOOL_UPDATE = /usr/bin/intltool-update
LD = /usr/bin/ld
LDFLAGS =         
LIBOBJS = 
LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBVERS = 4:7:0
LIB_LIBINTL = 
LIPO = 
LN_S = ln -s
LTLIBOBJS = 
MAINT = #
MAKEINFO = ${SHELL} /home/izto/src/rrdtool-1.3.8/missing --run makeinfo
MKDIR_P = /bin/mkdir -p
MKINSTALLDIRS = ./mkinstalldirs
MSGFMT = /usr/bin/msgfmt
MSGFMT_OPTS = -c
MSGMERGE = /usr/bin/msgmerge
MULTITHREAD_CFLAGS = -pthread
MULTITHREAD_LDFLAGS = -lpthread 
NM = /usr/bin/nm -B
NMEDIT = 
NROFF = /usr/bin/nroff
NUMVERS = 1.3008
OBJDUMP = objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = rrdtool
PACKAGE_BUGREPORT = 
PACKAGE_NAME = rrdtool
PACKAGE_STRING = rrdtool 1.3.8
PACKAGE_TARNAME = rrdtool
PACKAGE_VERSION = 1.3.8
PATH_SEPARATOR = :
PERL = /usr/bin/perl
PERLCC = 
PERLCCFLAGS = 
PERLFLAGS = 
PERLLD = 
PERLLDFLAGS = 
PERL_CC = /usr/bin/cc
PERL_MAKE_OPTIONS = PREFIX=$(DESTDIR)/usr LIB=$(DESTDIR)/usr/lib/perl/5.8.8
PERL_VERSION = 5.8.8
PKGCONFIG = pkg-config
POD2HTML = /usr/bin/pod2html
POD2MAN = /usr/bin/pod2man
POFILES = 
POSUB = po
PO_IN_DATADIR_FALSE = 
PO_IN_DATADIR_TRUE = 
PTHREAD_CC = gcc
PTHREAD_CFLAGS = -pthread
PTHREAD_LIBS = -lpthread 
PYTHON = /usr/bin/python
PYTHON_EXEC_PREFIX = ${exec_prefix}
PYTHON_INCLUDES = -I/usr/include/python2.6
PYTHON_PLATFORM = linux2
PYTHON_PREFIX = ${prefix}
PYTHON_VERSION = 2.6
RANLIB = ranlib
RRDDOCDIR = ${datadir}/doc/${PACKAGE}-${VERSION}
RRDGRAPH_YLEGEND_ANGLE = 
RRD_DEFAULT_FONT = "DejaVu Sans Mono,Bitstream Vera Sans Mono,monospace,Courier"
RRD_GETOPT_LONG = LIBC_HAS_GETOPT_LONG
RUBY = no
RUBY_MAKE_OPTIONS = sitedir=$(DESTDIR)/usr/lib/ruby
SED = /bin/sed
SET_MAKE = 
SHELL = /bin/sh
STRIP = strip
TCL_INCLUDE_SPEC = -I/usr/include
TCL_LD_SEARCH_FLAGS = 
TCL_PACKAGE_DIR = /usr/lib /tclrrd1.3.8
TCL_PACKAGE_PATH = /usr/lib 
TCL_PREFIX = /usr
TCL_SHLIB_CFLAGS = -fPIC
TCL_SHLIB_LD = ${CC} -shared ${CFLAGS} ${LDFLAGS}
TCL_SHLIB_SUFFIX = .so
TCL_STUB_LIB_SPEC = -L/usr/lib -ltclstub8.5
TCL_VERSION = 8.5
TROFF = /usr/bin/groff
USE_NLS = yes
VERSION = 1.3.8
XGETTEXT = /usr/bin/xgettext
abs_builddir = /home/izto/src/rrdtool-1.3.8/doc
abs_srcdir = /home/izto/src/rrdtool-1.3.8/doc
abs_top_builddir = /home/izto/src/rrdtool-1.3.8
abs_top_srcdir = /home/izto/src/rrdtool-1.3.8
ac_ct_CC = gcc
ac_ct_DUMPBIN = 
acx_pthread_config = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = i686-pc-linux-gnu
build_alias = 
build_cpu = i686
build_os = linux-gnu
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = i686-pc-linux-gnu
host_alias = 
host_cpu = i686
host_os = linux-gnu
host_vendor = pc
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = $(SHELL) /home/izto/src/rrdtool-1.3.8/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = /var
lt_ECHO = echo
mandir = ${datarootdir}/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgpyexecdir = ${pyexecdir}/rrdtool
pkgpythondir = ${pythondir}/rrdtool
prefix = /usr
program_transform_name = s,x,x,
psdir = ${docdir}
pyexecdir = /usr/lib/python2.6/site-packages
pythondir = /usr/lib/python2.6/site-packages
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = /etc
target = i686-pc-linux-gnu
target_alias = 
target_cpu = i686
target_os = linux-gnu
target_vendor = pc
top_build_prefix = ../
top_builddir = ..
top_srcdir = ..
SUFFIXES = .pod .1 .man .html .txt .pm .pdf .inc

#AUTOMAKE_OPTIONS        =  foreign

#ACLOCAL_M4 = $(top_srcdir)/config/aclocal.m4
CLEANFILES = *.1 *.html *.txt *-dircache RRD?.pod *.pdf *~ core *itemcache *.rej *.orig *.tmp
POD = bin_dec_hex.pod        rrddump.pod            rrdgraph_examples.pod  rrdrestore.pod         rrdupdate.pod  \
      cdeftutorial.pod       rrdfetch.pod           rrdgraph_graph.pod     rrdthreads.pod         rrdxport.pod   \
      rpntutorial.pod        rrdfirst.pod           rrdgraph_rpn.pod       rrdtool.pod                           \
      rrd-beginners.pod      rrdinfo.pod            rrdtune.pod            rrdbuild.pod                          \
      rrdcgi.pod             rrdgraph.pod           rrdlast.pod            rrdlastupdate.pod                     \
      rrdcreate.pod          rrdgraph_data.pod      rrdresize.pod          rrdtutorial.pod                       

PMP = RRDs.pod RRDp.pod
MAN = $(POD:.pod=.1)
TXT = $(MAN:.1=.txt)
HTML = $(POD:.pod=.html) $(PMP:.pod=.html)
PDF = $(MAN:.1=.pdf)

# what should go into the distribution
EXTRA_DIST = $(POD) $(HTML) $(MAN) $(TXT) rrdtool-dump.dtd rrdtool-xport.dtd
idocdir = $(RRDDOCDIR)/txt
idoc_DATA = $(POD) $(TXT)
ihtmldir = $(RRDDOCDIR)/html
ihtml_DATA = $(HTML)
imandir = $(mandir)/man1
iman_DATA = $(MAN)
all: all-am

.SUFFIXES:
.SUFFIXES: .pod .1 .man .html .txt .pm .pdf .inc .pl .src
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  doc/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: # $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-idocDATA: $(idoc_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(idocdir)" || $(MKDIR_P) "$(DESTDIR)$(idocdir)"
	@list='$(idoc_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(idocDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(idocdir)/$$f'"; \
	  $(idocDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(idocdir)/$$f"; \
	done

uninstall-idocDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(idoc_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(idocdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(idocdir)/$$f"; \
	done
install-ihtmlDATA: $(ihtml_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(ihtmldir)" || $(MKDIR_P) "$(DESTDIR)$(ihtmldir)"
	@list='$(ihtml_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(ihtmlDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(ihtmldir)/$$f'"; \
	  $(ihtmlDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(ihtmldir)/$$f"; \
	done

uninstall-ihtmlDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(ihtml_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(ihtmldir)/$$f'"; \
	  rm -f "$(DESTDIR)$(ihtmldir)/$$f"; \
	done
install-imanDATA: $(iman_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(imandir)" || $(MKDIR_P) "$(DESTDIR)$(imandir)"
	@list='$(iman_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(imanDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(imandir)/$$f'"; \
	  $(imanDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(imandir)/$$f"; \
	done

uninstall-imanDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(iman_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(imandir)/$$f'"; \
	  rm -f "$(DESTDIR)$(imandir)/$$f"; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(DATA) all-local
installdirs:
	for dir in "$(DESTDIR)$(idocdir)" "$(DESTDIR)$(ihtmldir)" "$(DESTDIR)$(imandir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

html-am: html-local

info: info-am

info-am:

install-data-am: install-idocDATA install-ihtmlDATA install-imanDATA
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook

install-dvi: install-dvi-am

install-exec-am:

install-html: install-html-am

install-info: install-info-am

install-man:

install-pdf: install-pdf-am

install-ps: install-ps-am

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am: pdf-local

ps: ps-am

ps-am:

uninstall-am: uninstall-idocDATA uninstall-ihtmlDATA \
	uninstall-imanDATA

.MAKE: install-am install-data-am install-strip

.PHONY: all all-am all-local check check-am clean clean-generic \
	clean-libtool distclean distclean-generic distclean-libtool \
	distdir dvi dvi-am html html-am html-local info info-am \
	install install-am install-data install-data-am \
	install-data-hook install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-idocDATA \
	install-ihtmlDATA install-imanDATA install-info \
	install-info-am install-man install-pdf install-pdf-am \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am pdf-local ps ps-am uninstall \
	uninstall-am uninstall-idocDATA uninstall-ihtmlDATA \
	uninstall-imanDATA


all-local: link txt man html-local

.src.pod:
	perl -n -e 'if (/^=include\s+(\S+)/){open F,"$$1.inc" || die $$?;print <F>; close F} else {print}'  $<  > $@

.pod.1 .pm.1 .pl.1:
	/usr/bin/pod2man --release=$(VERSION) --center=rrdtool $<  > $@

.1.txt:
	GROFF_NO_SGR=1 /usr/bin/nroff -man -Tlp $< > $@

.1.pdf:
	/usr/bin/groff -man $< | ps2pdf - $@

.pm.html .pod.html .pl.html:
	/usr/bin/pod2html --infile=$< --outfile=$@ --noindex --htmlroot=. --podpath=. --title=$*

RRDs.pod:
	$(LN_S) $(top_srcdir)/bindings/perl-shared/RRDs.pm RRDs.pod

RRDp.pod:
	$(LN_S) $(top_srcdir)/bindings/perl-piped/RRDp.pm RRDp.pod

link: RRDp.pod RRDs.pod

man: $(MAN)

html-local: $(HTML)

txt: $(TXT)

pdf-local: $(PDF)

pod: $(POD)

install-data-hook:
	cd $(DESTDIR)$(ihtmldir) && rm -f index.html && $(LN_S) rrdtool.html index.html
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
